Dirty Electricity Meter & Filters



Click on the pictures to enlarge them 


About the product

Dirty Electricity is a mid-high frequency (100-100000Hz) electric noise that is created by none-linear electric consumers (like power switches, power converters, CLF light bulbs, PC, electronic equipment and other). This noise can be measured in most of today's in house electric wires. The noise can be seen by an electric analyzer high voltage scope, or by connecting a special GS unit STETZERIZER(C) microsurge meter to power sockets in the house. The noise itself can be minimized by the special developed GRAHAM STETZER(C)  filters.

The meter and filters are manufactured specially for each country in order to support the country's electric safety standards, frequency and socket shape.

The meter is sold by itself, and the testing is very easy, every one can do it, just plug it in and read the number.

The Filters are sold in bulks of 12 or 15 units, which should be enough for a normal size 3 bedrooms apartment. The installation of the filters is very easy, just plug it in to the power socket, and watch the number on the meter reduced.

The filters produce some ELF(Extreme Low Frequency) EMF/EMR (ElectroMagnetic Fields/Electro-Magnetic Radiation), safety distance should be between 50cm to 100cm (just like any power converter).


Videos and pictures

Soon - Video review of the Dirty electricity meter and filters

Click on the pictures to enlarge them 


Dirty Electricity noise(in blue) and 50Hz clean signal (in Red)

picture - Dirty Electricity noise(in blue) and 50Hz clean signal (in Red)

Features

  • Meter - Allows you to easily and safely measure the level of Dirty Electricity.
  • Filter - Reduces the level of Dirty Electricity on the electric line.

Installation

  • Just plug it in!

Usage

  • Meter -  testing is very easy, every one can do it, just plug it in and read the number, repeat this for every socket in the house
  • Filters - just plug it in to the power socket, and watch the number on the meter reduced. repeat this operation until the meter shows less then 25 (>50 - too high, 50 to 25 Average, less than 25 - very good) 

Strong points

  • Works for years and years
  • Easy to use and install
  • No maintenance

Limitations

  • The filters produce some ELF(Extreme Low Frequency) EMR (Electro-Magnetic Radiation), safety distance should be between 50cm to 100cm (just like any power converter)
  • Needs 12-15 filters for every apartment
  • Filters may "buzz" if too few of them are installed


Price

  • Varies from one country to the other due to electric safety regulations

Where to buy



Request to order or ask any question

More info and links

Comments