ENV RD-10

$140.00$160.00

All in one, pocket-size, home-use EMF meter with fast sampling rate, able to measure fast-changing RF radiation signals (Sub 6GHz 5G, LTE, UMTS, CDMA, GSM, DECT, WIFI, Bluetooth…) alongside Extreme low frequency magnetic and electric field. The basic meter comes with a charging cable for US$140, or with a Data cable for connection to PC/Tablets/smartphones for US$160 (It is also possible to buy the cable kit later on for US$35).

 

SKU: N/A Category:

Description

About the ENV RD-10 RF/ELF EMF/EMR Meter

The ENV RD-10 RF/ELF-M/ELF-E meter is a small, fits into every pocket, is sensitive and fast, EMF smog meter, with an internal rechargeable battery, software monitoring capabilities, and super sensitive RF mode (as an alarm for EHS people, all LEDs are off, operate for hours, and start to beep at 0.1mW/m2). The internal rechargeable battery will power it for about 8 hours, can be charged via a mini-USB connector, and will save you the trouble and money for changing expensive external batteries. The Mini USB connectivity to your PC will allow you to use it with special monitoring software (see below) so you can monitor your environment for hours!

The fast sampling rate will allow the meter to pick up even the fastest signal.

The meter displays the levels of EMF over a Green-Yellow-Red Led lights, making it easier to read even if you are not an expert. If you are an advanced user, you can connect the meter to a PC and get the exact readings.

Advanced features may be added in the future via a USB software upload capability.

 

Videos of the ENV RD-10 EMF meter

ENV RD-10  Unboxing and Presentation 
ENV RD-10  Short Presentation and Operation
Making a holder for the ENV RD-10 
Using the ENV RD-10 with a PC to monitor EMF levels 
Using the ENV RD-10 with an android tablet to monitor EMF levels 

Unboxing and Presentation – https://www.youtube.com/watch?v=T_f3xQPINOw

Explanation of the RF exposure Accumulation and voice feedback features – https://www.youtube.com/watch?v=hfJnwh6Ue30

Basic features

  • Small case
  • Fast Sampling rate
  • USB connection
  • Monitoring software (win7, win8,win10, create comma-separated text files)
  • Very sensitive
  • Audio feedback
  • Super Sensitive mode
  • Rechargeable battery via USB
  • Color Led Light Bar

More info

  • Single Axis  RF meter, mW/m2, dBm, bandwidth of  100MHz-8GHz
  • Single Axis LFE magnetic meter, mGauss, uT, bandwidth of  50-10KHz
  • Single Axis LFE Electric field meter, V/m, bandwidth of 50Hz-50KHz
  • Sampling rate: 20,000/sec, display rate 5/sec.
  • Internal antenna and sensors.
  • Led display
  • Very fast (20000 samplings every second).
  • Audio Feedback-Alarm(Set to a fixed level)
  • Internal rechargeable battery (comes with a disposable battery).
  • 90 days money-back guarantee
  • 1-year warranty
  • Made in ISRAEL
  • Software and future updates can be downloaded from http://www.envirosens.com/

Strong points

  • Very fast sampling rate- Most important!
  • Easy to operate and read
  • Both RF and ELF (magnetic & Electric fields) in one very cheap meter.
  • Rechargeable batteries (via Mini USB)
  • Fits into every pocket
  • Advanced features for advanced users via Mini USB connection to a PC
  • Future software update via Mini USB
  • Super sensitive RF alarm mode will allow you to walk around with the meter for hours. The meter will alert you when being in a high RF environment or close to a source or a cell phone user.
  • Audio Feedback – beeps

Limitations 

  • Will show only part of the RF level when measuring multi-frequency sources, or several sources at once (like most RF meters).
  • a Single-axis meter.
  • Our ability to explain & help you understand a measurement, according to a photo of the measurement is limited.

Usage 

  • For RF measurement hold vertically
  • For ELF measurement, measure in X,Y and Z axis.
  • Measure RF and ELF levels.
  • Track and find EMF sources.
  • Find hot-spot and RF penetration to your house.
  • Can detect ELF sources & RF sources like WIFI, DECT, WIMAX, LTE, UMTS, CDMA, GSM, BLUETOOTH, ZIGBEE, Cell phone mast/antenna, Smart meters, Radar, Microwave oven, wireless PC and Tablets, routers and other RF sources

Price and Delivery options

Package contains:

  • ENV RD-10 meter
  • English User Manual
  • USB 2 Mini USB active cable for data transfer to PC

Who is the seller?

  • This product is sold by www.radmeters.com.

More info and links about the ENV RD-10 EMF meter

  • Manufacture site (Manual, PC drivers, Monitoring software for PC, Monitoring software for Android) – http://www.envirosens.com/

Downloads

Manufacturer’s datasheet:

  • RF Frequency Range: 100MHz to 8GHz
  • RF Measuring Range: -60dBm to +5dBm
  • RF Typical accuracy: ±6 dB
  • LFM (magnetic field) Frequency range: 50Hz to 10KHz
  • LFM measuring range: 0mG to 50mG with 0.1mG resolution
  • LFM accuracy: 20%
  • LFE (electric field) Frequency range: 50Hz-50KHz
  • LFE measuring range: 2v/m to 1000v/m
  • LFE accuracy: 25%
  • Display: Sampling rate:
  • Sampling rate: 20,000/sec (updates 5 times a second on the LEDs / 2 times a second for USB data)
  • RF technologies: Analog RF and Digital burst RF (GSM, TDMA, CDMA, LTE, DECT, ZigBee, Bluetooth, UWB, Wi-Fi, WiMAX 2.4GHz, 3.6GHz, 5.8GHz, 2,3,4 generations).

 

More videos

Using the ENV RD-10 with a PC to monitor EMF levels 
Using the ENV RD-10 with an android tablet to monitor EMF levels 

Additional information

Weight N/A
ENV RD10

ENV RD10 Charge, ENV RD10 Connect

Reviews

There are no reviews yet.

Be the first to review “ENV RD-10”

Your email address will not be published. Required fields are marked *