• CelloEye 24Gs-5 RF detector (5 LEDs light indication & beeping sound!!!)
• It can be used to detect RF sources, RF emissions, and RF radiation up to 24GHz.
• It uses five LED lights to show when the RF radiation level is over  0.1-1 mW/m2 (and up to around 5mW/m2).
• It is not a replacement for an RF/EMF meter, does not indicate RF levels, and is not REAL TIME (does not react to short RF signals).
• Very long (up to 4 years) working time using a single CR2032 battery (depending on the RF radiation detection).
• It can be glued to walls, windows, and doorsteps, in order to detect RF radiation or if someone enters an RF source into the house.
• It can be carried in your pocket
• Frequency response 0.05-24GHz
• Standard Sensitivity from ~0.1-1 mW/m2 – around 5mW/m2.
• Beeps from ~0.1-1 mW/m2
• It can work without a battery change for up to 4 years (depending on how often it beeps and blinks).

Possible usage of the CelloEye 24Gs-5 RF Detector

• A very simple RF detector, with 5 less indicating the (approximately) RF level, and Beeping sound,  for training, schools, demos…
• A very simple RF detector for finding RF sources & penetration points in a low RF house.
• A cheap RF detector that can be glued to windows, doors, and walls, to allow detection of incoming RF bursts or when people with RF sources come into the Low EMF house.
• A tiny RF detector to be used by EHS (Electromagnetic Hyper Sensitive) people can carry with them, to alert them of RF radiation when going into places with high RF, or when people with smartphones or wireless devices come close to them.

The specs of CelloEye 24Gs-5 RF Detector

• Model number: CelloEye 24Gs – ENV RD1S (light indication & beeping sound!!!)
• RF detector with one single LED light that lights up, and a beeping sound,  whenever RF radiation is detected above the threshold of 0.1mW/m2
• Run using a single CR2032 battery
• The battery can last up to 4 years (depending on how often it beeps and blinks).
• Weight 18g
• Size
  Height 56mm
  Wide 39mm
  thickness 12mm
• Frequency response 0.05-24GHz
• Sensitivity from ~0.1-1 mW/m2 (first led), to around 5mW/m2 (last red LED).
• Beeps from ~0.1-1 mW/m2.
• You can ask us to increase the detector sensitivity by X10 or X100 – https://www.4ehsbyehs.com/product/increase-sensitivity-celloeye-24gs/
• Manufacture ENVIROSENCE LTD
• Made in Israel
• Sent from Israel
• This RF detector was developed with our close cooperation and according to our requirements so that it would be used by Electromagnetic Hyper Sensitive(EHS) people to detect RF devices and emissions in their houses, and when RF sources are being entered into their homes.

Videos

Link – https://youtu.be/zkzfoMOxJ_I

RF alarm system using the CelloEye 24G RF detectors – https://youtu.be/uBUsmc80sHo

The post CelloEye 24Gs-5 – A TINY RF DETECTOR WITH BEEPING SOUND and 5 LEDs INDICATION appeared first on For EHS By EHS.

• CelloEye 24Gs RF detector (light indication & beeping sound!!!)
• It can be used to detect RF sources, RF emissions, and RF radiation up to 24GHz.
• It uses one LED light to show when the RF radiation level is over  0.1m-1W/m2
• Very long (up to 4 years, depending on how often it beeps and blinks) working time using a single CR2032 battery (depending on the RF radiation detection).
• It is not a replacement for an RF/EMF meter, does not indicate RF levels, and is not REAL TIME (does not react to short RF signals).
• It can be glued to walls, windows, and doorsteps, in order to detect RF radiation or if someone enters an RF source into the house.
• Can be carried in your pocket
• Frequency response 0.05-24GHz
  Standard Sensitivity from ~0.1 -1 mW/m2
  10X increased sensitivity ~0.01-0.1 mW/m2 (US10% extra)
  100X increased sensitivity ~0.001-0.01 mW/m2 (US10% extra)
  Weight 18g
  Can work without a battery change for up to 4 years (depending on how often it beeps and blinks).

Possible usage of the CelloEye 24Gs RF Detector

• A very simple RF detector, with “RF exists” or “No RF” indication for training, schools, demos…
• A very simple RF detector for finding RF sources & penetration points in a low RF house.
• A cheap RF detector that can be glued to windows, doors, and walls, to allow detection of incoming RF bursts or when people with RF sources come into the Low EMF house.
• A tiny RF detector to be used by EHS (Electromagnetic Hyper Sensitive) people can carry with them, to alert them of RF radiation when going into places with high RF, or when people with smartphones or wireless devices come close to them.

Sensitivities options

Please note that it is not a replacement for an RF/EMF meter, does not indicate RF levels, and is not REAL TIME (does not react to short RF signals).
Select the required sensitivity (hardware-coded) according to your home RF levels:

• Standard Sensitivity from ~0.1 -1 mW/m2
• 10X increased sensitivity ~0.01-0.1 mW/m2 (US$10 extra)
• 100X increased sensitivity ~0.001-0.01 mW/m2 (US$10 extra)

Spec of CelloEye 24Gs RF Detector

• Model number: CelloEye 24Gs – ENV RD1S (light indication & beeping sound!!!)
• RF detector with one single LED light that lights up, and a beeping sound,  whenever RF radiation is detected above the threshold of 0.1mW/m2
• Run using a single CR2032 battery
• The battery can last up to 4 years (depending on how often it beeps and blinks).
• Weight 18g
• Size
  Height 56mm
  Wide 39mm
  thickness 12mm
• Frequency response 0.05-24GHz
• Sensitivity from 0.1 mW/m2
• You can ask us to increase the detector sensitivity by X10 or X100 – https://www.4ehsbyehs.com/product/increase-sensitivity-celloeye-24gs/
• Manufacture ENVIROSENCE LTD
• Made in Israel
• Sent from Israel
• This RF detector was developed with our close cooperation and according to our requirements so that it would be used by Electromagnetic Hyper Sensitive(EHS) people to detect RF devices and emissions in their houses, and when RF sources are being entered into their homes.

Videos

Link – https://youtu.be/z9NUoMScijM

RF alarm system using the CelloEye 24G RF detectors – https://youtu.be/uBUsmc80sHo

The post CelloEye 24Gs – A TINY RF DETECTOR WITH BEEPING SOUND appeared first on For EHS By EHS.

• CelloEye 24G RF Detector – A Tiny RF detector with light indication only, no beeping sound!!!
  For a version with a beeping sound, please see – https://www.4ehsbyehs.com/product/celloeye-24gs/)
• It can be used to detect RF sources, RF emissions, and RF radiation.
• It uses one LED light to show when the RF radiation level is over  0.1mW/m2
• Very long (up to 4 years) working time using a single CR2032 battery (depending on the RF radiation detection).
• It is not a replacement for an RF/EMF meter, does not indicate RF levels, and is not REAL TIME (does not react to short RF signals).
• It can be glued to walls, windows, and doorsteps, in order to detect RF radiation or if someone enters an RF source into the house.
• Frequency response 0.05-24GHz
• Sensitivity from 0.1-1  mW/m2
• Weight 18g
• Work without a battery change for up to 4 years (depending on how often it blinks)

Possible usage of the CelloEye 24G RF Detector

• A very simple RF detector, with “RF exists” or “No RF” indication for training, schools, demos…
• A very simple RF detector for finding RF sources & penetration points in a low RF house.
• A cheap RF detector that can be glued to windows, doors, and walls, to allow detection of incoming RF bursts or when people with RF sources come into the Low EMF house (if the RF level in your house is lower than 0.1mW/m2).

CelloEye 24G  RF Detector – No sound/beeper

• Model number: CelloEye 24G (light indication only, no beeping sound!!! for a version with beeping sound, please see – https://www.4ehsbyehs.com/product/celloeye-24gs/)
• RF detector with one single LED light that lights up whenever RF radiation is detected above the threshold of 0.1-1 mW/m2
• Run using a single CR2032 battery
• The battery can last up to 4 years (depending on how often it blinks).
• Weight 18g
• Size
  Height 56mm
  Wide 39mm
  thickness 12mm
• Frequency response 0.05-24GHz
• Sensitivity from 0.1-1  mW/m2
• Manufacture ENVIROSENCE LTD
• Made in Israel
• Sent from Israel
• This RF detector was developed with our close cooperation and according to our requirements so that it would be used by Electromagnetic Hyper Sensitive(EHS) people to detect RF devices and emissions in their houses, and when RF sources are being entered into their homes.

Videos about CelloEye 24G RF Detector

Link – https://youtu.be/EzDb5nx94GM

RF alarm system using the CelloEye 24G RF detectors – https://youtu.be/uBUsmc80sHo

The post CelloEye 24 RF DETECTOR appeared first on For EHS By EHS.